CRUZE 100% meth injection system
Methanol Injection Differences
While yes you can buy a universal meth injection kit off of eBay or amazon for $400-$600 what people need to realize is they cannot run 100% methanol. Those cheap kits use push lock connections that leak and the pumps are cheaply built with plastic parts that will melt from the meth. My kit uses high pressure stainless steel braided lines and high pressure injectors. The pump has stainless steel internals designed to work with 100% methanol.
Adjust your pressure and AFR
My kit is designed to be able to adjust pressures and air fuel ratios on the fly. If you find your car is running too rich or too lean you can literally spin a knob and change your methanol injection flows. This kit also allows you to test any time you need to make sure your system is working properly. This box can be hidden under the dash I just have it out in the open so I can show you what it looks like.
Warning LED lights
The kit will come with two LED lights. These can be installed almost anywhere. Once your meth injection is set up to your desired pressures all you need are these LED lights. Once light will show you when your system is pumping partial meth then once it hits full 100% pressure the LED will change color and let you know it's on full blast. The other LED is a low fluid level warning. Once you get low in your tank the system will let you know by activating the LED.
Pump safety
Other cheapo meth injection kits have a controller that will "show" you the system is pumping. Those other kits simply let you know it's supposed to be turning on the pump. One thing you need to know is those other system do know if the pump even turns on. So a fancy gauge will tell you it is "on" however you just wont know if it really is. This system has a pressure safety built in. The LED light you see on the dash will not light up unless it sees pressure from the pump via this pressure actuated switch.
High pressure components
Other cheapo meth injection kits are cheap for a lot of reason but first off they use plastic push lock fuel lines. Those lines leak over time as well as MELT!!!!!! I don't know about you I wouldn't want fuel lines melting under the hood of my car. I also would not want methanol spraying all over a hot engine bay that can catch on fire! This system uses high pressure fittings stainless steel lines and a high pressure injector.
High pressure CRUZE pump
The main version of the methanol injection is designed to use the washer fluid tank on the 2016-2019 CRUZE. The reason I designed it this way is because I like having a firewall between me and the fuel system. A lot of the cheapo kits have tanks that you put in your trunk. The other problem with this is your adding a lot of distance for methanol to travel. More area to have something fail or leak. Now some people do not want to give up the washer fluid tank. If you wish to run a tank in the trunk it is an additional $350 cost. This will give you a large trunk tank. enough high pressure stainless steel braided fuel like and you can also mount the pump in the trunk with the pressure switch.
Easy under hood wiring
This system is designed for the CRUZE. It comes with the wiring needed to power and ground your system.
CRUZE meth injection V2 kit
This is the new V2 kit. I was able to get the cost down to same everyone money overall. The new kit is now $850 and is 100% methanol capable. With this kit youc an also run 50/50 meth. This is every component you will receive with the CRUZE kit. *******This kit will work with the OEM intercooler pipes and the aftermarket intercooler system I provide for the CRUZE community. ********