Flex Fuel Sensor kit
Worlds first gen 2 cruze flex fuel tune
Jerry at Bad News Racing worked for a solid month to crack teh CRUZE Ecm and offer a flex fuel tune that works with flex fuel kits. This tune allows the ECM to adjust for the alcohol content in your E85 and adjust the car for that percentage. Also if you switch to gasoline the tune will adjust for the switch on it's own.
BNR Flex Fuel E85 Tune $674
I talked with Jerry at Bad News Racing. At the time I designed my kit, no company made a kit. One or two claimed they did; however, they didn't have the right ECM pins or programing associated with it. So, I made a video explaining the sensor because I was excited to bring this kit to the CRUZE community. Since then, I confirmed with Jerry how my kit works and the wire harness/pins I use that are needed to tune for the kit. Good news, he can and will tune the Gen 2 CRUZE.
After talking with jerry using my sensor and his flex fuel tune the cruze is capable of producing an additional 80-100 HP and 100-120 TQ depending on your supporting mods.
BUDGET DIY version $250
This version of my kit will give you all the main pieces you will need to run flex fuel. I support the CRUZE community as much as I can. Some people like to "make" stuff work, so I offer a version that gives you the big parts needed. You can figure out the rest on your own.
Content sensor
Fuel system adapters
Wire harness (you wire yourself)
Flex Fuel Version 2 $300
This version of my kit comes with everything needed to install this kit into a CRUZE. The kit will come with the following. It is also wired to fit a CRUZE ECM 12v and grounds!
Content sensor
Fuel system adapters
Fuel line removal tool
Wire harness (wired for a CRUZE)
Flex Fuel Version 3 $375
Version 2 and version 3 of my kits are designed to install into the CRUZE with ease. Version 2 uses the fuse box to power and ground the alcohol content sensor. Version3 uses existing CRUZE wire harnesses to power and ground the sensor for the ECM to be able to read the mixture %. This version of the kit cost a little bit more due to more materials are needed to build this kit. Both versions 2 and 3 are perfect to run flex fuel but with version 3 some people like things to be more plug in like an OEM part would install.
Content sensor
Fuel system adapters
Fuel line removal tool
Wire harness designed to plug into OEM engine harness.